Hello Clare,
Suzanne Quigley responded to your question with the following comments:
"Without knowing the size and the material or if stitched to a backing and stretched, or if the frame is backed-
1) If the frame is not necessary to the piece, I would have it removed.
If stitched to a backing, have a conservator remove it.
2) It's important to store the piece flat, or if very large removed from the frame.
3) if large, after cleaning it could be rolled face out interleaved and wrapped with unbleached cotton muslin washed in orvus to remove sizing. The tube itself would be covered likewise in muslin or mylar to act as a barrier.
4) if stored flat it can be covered with muslin.
5) As [suggested] it is best cleaned of dust with a low suction vacuum, but my experience is that it should be vacuumed through a fine mesh, non-metallic screen. Both sides.
I hope this is helpful."
Suzanne's first point may tie in with Alyssa's questions, but I will let Alyssa speak to that. I think we are all curious now how the piece came to be framed!
Are you familiar with Orvus, the detergent that Suzanne suggested for cleaning the muslin beforehand? It's available from conservation suppliers, but - based on a quick internet search - possibly also from vendors that cater to quilters, fiber artists, and people who work with horses.
Suzanne mentioned vacuuming through a screen. If you would like some visual guidance on what that might look like, there is a video from the Sustainable Heritage Network that shows vacuuming through a screen. The screen used in the video is PVC-coated fiberglass insect screening from a hardware store, with the rough edges covered by Tyvek (timestamp 3:06). The video also stresses the need for suction control to avoid damaging the object and includes some tips and tricks on modifying vacuum attachments to be suitable for using on collections.
Please let me know if you have questions about any of this. I look forward to hearing more about how others have approached similar situations.
Best wishes,
Lisa
------------------------------
Lisa Imamura (she/her/hers)
Connecting to Collections Care Monitor
------------------------------
Original Message:
Sent: 05-18-2023 16:22
From: Clare Sepulveda
Subject: Storing a framed tapestry
Hello,
The museum I work at recently acquired a framed tapestry, however the frame does not have glass or plexiglass, leaving the face of the tapestry exposed. I am worried about it collecting more dust while it is stored, I am thinking that it should be covered in some way, but not sure with what material. Muslin? What would be the best way to remove the dust that has already accumulated?
Thanks in advance!
------------------------------
Clare Sepulveda
Museum Registrar
Art Museum of South Texas
Corpus Christi, TX
------------------------------